1992 Plymouth Colt Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Plymouth Colt, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Colt — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Plymouth Colt's 4x114.3 bolt pattern era, which continued through 1994 (3 consecutive years). Wheels from any 1992–1994 Plymouth Colt are cross-compatible with the 1992 model.
Plymouth Colt Bolt Pattern by Year
The table below shows how the Colt's wheel specifications have changed over the years. The 1992 model year is highlighted.
Fitment Notes
The 1992 Plymouth Colt has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Plymouth Colt appears from 1992 to 1994 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
1992 Plymouth Colt — Frequently Asked Questions
What is the bolt pattern for a 1992 Plymouth Colt?
The 1992 Plymouth Colt uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mmmm.
What other years of Plymouth Colt have the same bolt pattern as the 1992?
The Plymouth Colt uses the 4x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
Do 1992 Plymouth Colts use lug bolts or lug nuts?
The 1992 Colt requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1992 Plymouth?
The 1992 Colt uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 1992 Plymouth Colt?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1992 Plymouth Colt?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 67.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Plymouth Colt is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1994 (3 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1992 Plymouth Colt, please report it via our About page contact so we can verify and update this record.