2004 Volvo S40 (New) Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Volvo S40 (New), along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 S40 (New) — Year-Specific Fitment Context
The 2004 is the only model year of the Volvo S40 (New) in our database using the 4x114.3 bolt pattern.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2004 Volvo S40 (New)
For your 2004 Volvo S40 (New), the 4x114.3 bolt pattern is unique to this model year. The center bore is 67.1mm, so aftermarket wheels must either match this bore exactly or use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is critical: the factory spec is 44mm, and staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone seat). Ball seat lug nuts are not compatible and can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Volvo S40 (New) appears from 2004 to 2004 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Aftermarket wheels with a larger center bore require hub-centric rings; plastic rings are acceptable for street use.
- ✅ Avoid using wheels with offset below 35mm or above 50mm to prevent fender rubbing or brake caliper contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Volvo S40 (New) — Frequently Asked Questions
What is the bolt pattern for a 2004 Volvo S40 (New)?
The 2004 Volvo S40 (New) uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
Will wheels from another Volvo fit my 2004 S40 (New)?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
How do I measure the bolt pattern on my 2004 Volvo?
The 2004 S40 (New) uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2004 Volvo S40 (New)?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the factory wheel offset for a 2004 Volvo S40 (New)?
The OEM offset for the 2004 S40 (New) is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 44mm offset mean for the 2004 S40 (New)?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset