1992 Hyundai Elantra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Hyundai Elantra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Elantra — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Hyundai Elantra's 4x114.3 bolt pattern era, which continued through 2007 (16 consecutive years). Wheels from any 1992–2007 Hyundai Elantra are cross-compatible with the 1992 model. Across its full production run (1992–2024), the Elantra has also used: 5x114.3.
Hyundai Elantra Bolt Pattern by Year
The table below shows how the Elantra's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 4x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 35-50 |
| 2009 | 5x114.3 | 67.1 | 35-50 |
| 2010 | 5x114.3 | 67.1 | 35-50 |
| 2011 | 5x114.3 | 67.1 | 35-50 |
| 2012 | 5x114.3 | 67.1 | 35-50 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1992 Hyundai Elantra
For your 1992 Hyundai Elantra, the bolt pattern is 4x114.3, center bore 67.1mm, and offset 46mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and stress on lug studs. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles. Wheels from 1992-2007 Elantra models are direct fit.
Historical Fitment Data Reference
In our dataset, Hyundai Elantra appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 40mm or above 52mm to prevent rubbing or clearance issues.
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 67.1mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Hyundai Elantra — Frequently Asked Questions
What is the bolt pattern for a 1992 Hyundai Elantra?
The 1992 Hyundai Elantra uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Elantra have the same bolt pattern as the 1992?
The Hyundai Elantra uses the 4x114.3 pattern from 1992 through 2007. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What does 46mm offset mean for the 1992 Elantra?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What lug nut size does the 1992 Hyundai Elantra use?
The 1992 Hyundai Elantra uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 1992 Hyundai Elantra?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Hyundai fit my 1992 Elantra?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset