2008 Hyundai Elantra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Hyundai Elantra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Elantra — Year-Specific Fitment Context
The 2008 model year marks the beginning of the Hyundai Elantra's 5x114.3 bolt pattern era, which continued through 2024 (17 consecutive years). Wheels from any 2008–2024 Hyundai Elantra are cross-compatible with the 2008 model. Note: the 2007 model used a different pattern (4x114.3), so its wheels are NOT interchangeable with the 2008. Across its full production run (1992–2024), the Elantra has also used: 4x114.3.
Hyundai Elantra Bolt Pattern by Year
The table below shows how the Elantra's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 4x114.3 | 67.1 | 46 |
| ▸ 2008 | 5x114.3 | 67.1 | 35-50 |
| 2009 | 5x114.3 | 67.1 | 35-50 |
| 2010 | 5x114.3 | 67.1 | 35-50 |
| 2011 | 5x114.3 | 67.1 | 35-50 |
| 2012 | 5x114.3 | 67.1 | 35-50 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Hyundai Elantra
For the 2008 Hyundai Elantra, the center bore is 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 35-50mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree). Using incorrect lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully for brake caliper clearance.
Historical Fitment Data Reference
In our dataset, Hyundai Elantra appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2007 or earlier Elantra models (4x114.3 pattern) as they are not compatible.
- ✅ When installing aftermarket wheels, verify that the wheel hub bore is at least 67.1mm; use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Hyundai Elantra — Frequently Asked Questions
What is the bolt pattern for a 2008 Hyundai Elantra?
The 2008 Hyundai Elantra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Elantra have the same bolt pattern as the 2008?
The Hyundai Elantra uses the 5x114.3 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use 2007 Hyundai Elantra wheels on a 2008?
No. The 2007 Elantra used a 4x114.3 bolt pattern, which differs from the 2008's 5x114.3. They are not interchangeable.
How do I measure the bolt pattern on my 2008 Hyundai?
The 2008 Elantra uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2008 Hyundai Elantra?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Will wheels from another Hyundai fit my 2008 Elantra?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset