2021 Lotus Evora GT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Lotus Evora GT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 68.0 mm |
| Offset (ET) | 50-60mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2021 Evora GT — Year-Specific Fitment Context
The 2021 is the only model year of the Lotus Evora GT in our database using the 5x114.3 bolt pattern.
Fitment Notes
The 2021 Lotus Evora GT has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Lotus Evora GT appears from 2021 to 2021 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 110.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2021 Lotus Evora GT — Frequently Asked Questions
What is the bolt pattern for a 2021 Lotus Evora GT?
The 2021 Lotus Evora GT uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 68.0mm and the offset is 50-60mmmm.
Can I put aftermarket wheels on my 2021 Lotus Evora GT?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50-60mmmm, and a center bore of at least 68.0mm (using hub rings if larger).
What is the factory wheel offset for a 2021 Lotus Evora GT?
The OEM offset for the 2021 Evora GT is typically around 50-60mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2021 Lotus Evora GT?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 68.0mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
What lug nut size does the 2021 Lotus Evora GT use?
The 2021 Lotus Evora GT uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 68.0mm center bore important for the 2021 Evora GT?
The 68.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Lotus Evora GT is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2021-2021 (1 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 110.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2021 Lotus Evora GT, please report it via our About page contact so we can verify and update this record.