2018 Hyundai Elantra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Hyundai Elantra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2018 Elantra — Year-Specific Fitment Context
The 2018 Hyundai Elantra is in year 11 of 17 using the 5x114.3 pattern (2008–2024). Wheels from any 2008–2024 Hyundai Elantra are cross-compatible with the 2018 model. Across its full production run (1992–2024), the Elantra has also used: 4x114.3.
Hyundai Elantra Bolt Pattern by Year
The table below shows how the Elantra's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 4x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 35-50 |
| 2009 | 5x114.3 | 67.1 | 35-50 |
| 2010 | 5x114.3 | 67.1 | 35-50 |
| 2011 | 5x114.3 | 67.1 | 35-50 |
| 2012 | 5x114.3 | 67.1 | 35-50 |
| 2013 | 5x114.3 | 67.1 | 35-50 |
| 2014 | 5x114.3 | 67.1 | 35-50 |
| 2015 | 5x114.3 | 67.1 | 35-50 |
| 2016 | 5x114.3 | 67.1 | 35-50 |
| 2017 | 5x114.3 | 67.1 | 35-50 |
| ▸ 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
Fitment Notes
The 2018 Hyundai Elantra has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Hyundai Elantra appears from 1992 to 2024 (33 model years).
Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2018 Hyundai Elantra — Frequently Asked Questions
What is the bolt pattern for a 2018 Hyundai Elantra?
The 2018 Hyundai Elantra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Elantra have the same bolt pattern as the 2018?
The Hyundai Elantra uses the 5x114.3 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What does 35-50mm offset mean for the 2018 Elantra?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Can I put aftermarket wheels on my 2018 Hyundai Elantra?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2018 Hyundai Elantra?
The OEM offset for the 2018 Elantra is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 67.1mm center bore important for the 2018 Elantra?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Hyundai Elantra has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2024 (33 model years).
- Observed bolt-pattern variants: 2 (4x114.3, 5x114.3).
- Observed total offset span across years: 96.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 Hyundai Elantra, please report it via our About page contact so we can verify and update this record.