2025 Hyundai Tucson Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Hyundai Tucson Hybrid is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 Hyundai Tucson Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Tucson Hybrid — Year-Specific Fitment Context
The 2025 Hyundai Tucson Hybrid is in year 4 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 Hyundai Tucson Hybrid are cross-compatible with the 2025 model.
Hyundai Tucson Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Hyundai Tucson Hybrid (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the Tucson Hybrid's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Hyundai Tucson Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Hyundai Tucson Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2013 Hyundai Accent | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2017 Hyundai Azera | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2008 Hyundai Elantra | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2020 Hyundai Elantra GT | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Hyundai Elantra Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Hyundai Elantra N | 67.1 mm (Exact) | 55 | 12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Hyundai Tucson Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2025 Hyundai Tucson Hybrid?
The 2025 Hyundai Tucson Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Tucson Hybrid have the same bolt pattern as the 2025?
The Hyundai Tucson Hybrid uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Hyundai Tucson Hybrids use lug bolts or lug nuts?
The 2025 Tucson Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Hyundai fit my 2025 Tucson Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the factory wheel offset for a 2025 Hyundai Tucson Hybrid?
The OEM offset for the 2025 Tucson Hybrid is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Hyundai Tucson Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →