1992 Mitsubishi Galant Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Mitsubishi Galant, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Galant — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Mitsubishi Galant's 4x114.3 bolt pattern era, which continued through 2005 (14 consecutive years). Wheels from any 1992–2005 Mitsubishi Galant are cross-compatible with the 1992 model. Across its full production run (1992–2012), the Galant has also used: 5x114.3.
Mitsubishi Galant Bolt Pattern by Year
The table below shows how the Galant's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 38-46 |
| 2007 | 5x114.3 | 67.1 | 38-46 |
| 2008 | 5x114.3 | 67.1 | 38-46 |
| 2009 | 5x114.3 | 67.1 | 38-46 |
| 2010 | 5x114.3 | 67.1 | 38-46 |
| 2011 | 5x114.3 | 67.1 | 38-46 |
| 2012 | 5x114.3 | 67.1 | 38-46 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 1992 Mitsubishi Galant
For your 1992 Mitsubishi Galant, the bolt pattern is 4x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat nuts as specified. Avoid using incorrect lug nuts, as they can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mitsubishi Galant appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using wheels from 1992-2005 Galants, confirm center bore is 67.1mm; use hub rings if larger.
- ✅ Check offset carefully: 46mm is optimal; offsets below 40mm may rub struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Mitsubishi Galant — Frequently Asked Questions
What is the bolt pattern for a 1992 Mitsubishi Galant?
The 1992 Mitsubishi Galant uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Galant have the same bolt pattern as the 1992?
The Mitsubishi Galant uses the 4x114.3 pattern from 1992 through 2005. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What does 46mm offset mean for the 1992 Galant?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
Do 1992 Mitsubishi Galants use lug bolts or lug nuts?
The 1992 Galant requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 1992 Mitsubishi Galant?
The OEM offset for the 1992 Galant is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 1992 Mitsubishi Galant?
The factory center bore (hub bore) for the 1992 Mitsubishi Galant is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset