2001 Mitsubishi Galant Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Mitsubishi Galant, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Galant — Year-Specific Fitment Context
The 2001 Mitsubishi Galant is in year 10 of 14 using the 4x114.3 pattern (1992–2005). Wheels from any 1992–2005 Mitsubishi Galant are cross-compatible with the 2001 model. Across its full production run (1992–2012), the Galant has also used: 5x114.3.
Mitsubishi Galant Bolt Pattern by Year
The table below shows how the Galant's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| ▸ 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 38-46 |
| 2007 | 5x114.3 | 67.1 | 38-46 |
| 2008 | 5x114.3 | 67.1 | 38-46 |
| 2009 | 5x114.3 | 67.1 | 38-46 |
| 2010 | 5x114.3 | 67.1 | 38-46 |
| 2011 | 5x114.3 | 67.1 | 38-46 |
| 2012 | 5x114.3 | 67.1 | 38-46 |
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2001 Mitsubishi Galant
For your 2001 Mitsubishi Galant, the bolt pattern is 4x114.3 with a center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm to wheel bore) are essential to prevent vibration and ensure proper load transfer. The factory offset is 46mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper for most aftermarket wheels; ball seat for OEM Mitsubishi). Incorrect lug nuts can cause wheel loosening or damage. Verify clearance with your specific brake calipers and suspension components before final installation.
Historical Fitment Data Reference
In our dataset, Mitsubishi Galant appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance with aftermarket wheels; some designs may require spacers or grinding.
- ✅ If using wheels from a 5x114.3 Galant (2006+), adapters are needed; avoid mixing bolt patterns.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Mitsubishi Galant — Frequently Asked Questions
What is the bolt pattern for a 2001 Mitsubishi Galant?
The 2001 Mitsubishi Galant uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Galant have the same bolt pattern as the 2001?
The Mitsubishi Galant uses the 4x114.3 pattern from 1992 through 2005. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the PCD for a 2001 Mitsubishi Galant?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Galant, the PCD is 4x114.3.
What is the center bore of a 2001 Mitsubishi Galant?
The factory center bore (hub bore) for the 2001 Mitsubishi Galant is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2001 Mitsubishi Galant?
The OEM offset for the 2001 Galant is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2001 Mitsubishi Galant?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset