2006 Mitsubishi Galant Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Mitsubishi Galant, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Galant — Year-Specific Fitment Context
The 2006 model year marks the beginning of the Mitsubishi Galant's 5x114.3 bolt pattern era, which continued through 2012 (7 consecutive years). Wheels from any 2006–2012 Mitsubishi Galant are cross-compatible with the 2006 model. Note: the 2005 model used a different pattern (4x114.3), so its wheels are NOT interchangeable with the 2006. Across its full production run (1992–2012), the Galant has also used: 4x114.3.
Mitsubishi Galant Bolt Pattern by Year
The table below shows how the Galant's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| ▸ 2006 | 5x114.3 | 67.1 | 38-46 |
| 2007 | 5x114.3 | 67.1 | 38-46 |
| 2008 | 5x114.3 | 67.1 | 38-46 |
| 2009 | 5x114.3 | 67.1 | 38-46 |
| 2010 | 5x114.3 | 67.1 | 38-46 |
| 2011 | 5x114.3 | 67.1 | 38-46 |
| 2012 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Mitsubishi Galant
For your 2006 Mitsubishi Galant, the bolt pattern is 5x114.3, but the center bore is 67.1mm—a critical spec. Aftermarket wheels often have a larger bore (73.1mm), so hub-centric rings are mandatory to prevent vibration and ensure proper load transfer. Offset must stay within 38-46mm; deviating risks rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type: factory wheels use a conical (60-degree) seat, while aftermarket may require ball or flat seats. Mismatched lug nuts can cause wheel separation. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Mitsubishi Galant appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ If using aftermarket wheels, confirm the hub bore is at least 67.1mm; use hub-centric rings if larger.
- ✅ Avoid wheels from 2005 or earlier Galants—they use a 4x114.3 pattern and won't fit.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Mitsubishi Galant — Frequently Asked Questions
What is the bolt pattern for a 2006 Mitsubishi Galant?
The 2006 Mitsubishi Galant uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Galant have the same bolt pattern as the 2006?
The Mitsubishi Galant uses the 5x114.3 pattern from 2006 through 2012. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Can I use 2005 Mitsubishi Galant wheels on a 2006?
No. The 2005 Galant used a 4x114.3 bolt pattern, which differs from the 2006's 5x114.3. They are not interchangeable.
How tight should I torque the lug nuts on a 2006 Mitsubishi Galant?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2006 Mitsubishi Galant?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
Do 2006 Mitsubishi Galants use lug bolts or lug nuts?
The 2006 Galant requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset