2016 Aston Martin DB9 GT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Aston Martin DB9 GT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 68.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 DB9 GT — Year-Specific Fitment Context
The 2016 is the only model year of the Aston Martin DB9 GT in our database using the 5x114.3 bolt pattern.
Fitment Notes
The 2016 Aston Martin DB9 GT has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Aston Martin DB9 GT appears from 2016 to 2016 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2016 Aston Martin DB9 GT — Frequently Asked Questions
What is the bolt pattern for a 2016 Aston Martin DB9 GT?
The 2016 Aston Martin DB9 GT uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 68.1mm and the offset is 35-45mmmm.
How do I measure the bolt pattern on my 2016 Aston Martin?
The 2016 DB9 GT uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2016 Aston Martin DB9 GT?
The OEM offset for the 2016 DB9 GT is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2016 Aston Martin DB9 GT?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-45mmmm offset mean for the 2016 DB9 GT?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Aston Martin.
What lug nut size does the 2016 Aston Martin DB9 GT use?
The 2016 Aston Martin DB9 GT uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Aston Martin DB9 GT is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2016-2016 (1 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2016 Aston Martin DB9 GT, please report it via our About page contact so we can verify and update this record.