2018 Aston Martin Vanquish S Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Aston Martin Vanquish S, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 68.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Vanquish S — Year-Specific Fitment Context
The 2018 is the only model year of the Aston Martin Vanquish S in our database using the 5x114.3 bolt pattern. Across its full production run (2005–2018), the Vanquish S has also used: 5x108.
Aston Martin Vanquish S Bolt Pattern by Year
The table below shows how the Vanquish S's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Aston Martin Vanquish S
For your 2018 Aston Martin Vanquish S, the 5x114.3 bolt pattern is unique to this model year. The center bore is 68.1mm, so aftermarket wheels must either match this bore or use hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is critical: the factory range is 35-45mm. Deviating outside this can cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct M14x1.5 thread pitch and seat type (ball seat for Aston Martin). Using incorrect lug nuts can lead to wheel detachment. Verify wheel load ratings exceed vehicle requirements.
Historical Fitment Data Reference
In our dataset, Aston Martin Vanquish S appears from 2005 to 2018 (3 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to 103 lb-ft (140 Nm).
- ✅ Avoid spacers unless hub-centric and specifically designed for this chassis; they alter offset and stress bearings.
- ✅ Check inner clearance with the brake caliper; aftermarket wheels may require spacers or different spoke design.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Aston Martin Vanquish S — Frequently Asked Questions
What is the bolt pattern for a 2018 Aston Martin Vanquish S?
The 2018 Aston Martin Vanquish S uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 68.1mm and the offset is 35-45mmmm.
What is the factory wheel offset for a 2018 Aston Martin Vanquish S?
The OEM offset for the 2018 Vanquish S is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2018 Aston Martin Vanquish S?
The factory center bore (hub bore) for the 2018 Aston Martin Vanquish S is 68.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2018 Aston Martin Vanquish S?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 68.1mm center bore. Also verify that you have enough thread engagement for your M14x1.5 hardware.
What is the PCD for a 2018 Aston Martin Vanquish S?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Vanquish S, the PCD is 5x114.3.
What lug nut size does the 2018 Aston Martin Vanquish S use?
The 2018 Aston Martin Vanquish S uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset