2008 Mitsubishi Galant Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Mitsubishi Galant, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Galant — Year-Specific Fitment Context
The 2008 Mitsubishi Galant is in year 3 of 7 using the 5x114.3 pattern (2006–2012). Wheels from any 2006–2012 Mitsubishi Galant are cross-compatible with the 2008 model. Across its full production run (1992–2012), the Galant has also used: 4x114.3.
Mitsubishi Galant Bolt Pattern by Year
The table below shows how the Galant's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 38-46 |
| 2007 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2008 | 5x114.3 | 67.1 | 38-46 |
| 2009 | 5x114.3 | 67.1 | 38-46 |
| 2010 | 5x114.3 | 67.1 | 38-46 |
| 2011 | 5x114.3 | 67.1 | 38-46 |
| 2012 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Mitsubishi Galant
For your 2008 Mitsubishi Galant, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 38-46mm; staying within this range maintains steering geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Avoid ball-seat or flat-seat nuts as they can loosen. Re-torque after 50-100 miles to ensure safety.
Historical Fitment Data Reference
In our dataset, Mitsubishi Galant appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel hub bore is at least 67.1mm; use hub-centric rings if larger.
- ✅ Check offset carefully: too low (e.g., 35mm) may rub fenders; too high (e.g., 48mm) may contact suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Mitsubishi Galant — Frequently Asked Questions
What is the bolt pattern for a 2008 Mitsubishi Galant?
The 2008 Mitsubishi Galant uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Galant have the same bolt pattern as the 2008?
The Mitsubishi Galant uses the 5x114.3 pattern from 2006 through 2012. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What lug nut size does the 2008 Mitsubishi Galant use?
The 2008 Mitsubishi Galant uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2008 Mitsubishi Galant?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2008 Mitsubishi Galant?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Galant, the PCD is 5x114.3.
What is the center bore of a 2008 Mitsubishi Galant?
The factory center bore (hub bore) for the 2008 Mitsubishi Galant is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset