2011 Mitsubishi Galant Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mitsubishi Galant, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Galant — Year-Specific Fitment Context
The 2011 Mitsubishi Galant is in year 6 of 7 using the 5x114.3 pattern (2006–2012). Wheels from any 2006–2012 Mitsubishi Galant are cross-compatible with the 2011 model. Across its full production run (1992–2012), the Galant has also used: 4x114.3.
Mitsubishi Galant Bolt Pattern by Year
The table below shows how the Galant's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x114.3 | 67.1 | 46 |
| 1993 | 4x114.3 | 67.1 | 46 |
| 1994 | 4x114.3 | 67.1 | 46 |
| 1995 | 4x114.3 | 67.1 | 46 |
| 1996 | 4x114.3 | 67.1 | 46 |
| 1997 | 4x114.3 | 67.1 | 46 |
| 1998 | 4x114.3 | 67.1 | 46 |
| 1999 | 4x114.3 | 67.1 | 46 |
| 2000 | 4x114.3 | 67.1 | 46 |
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 38-46 |
| 2007 | 5x114.3 | 67.1 | 38-46 |
| 2008 | 5x114.3 | 67.1 | 38-46 |
| 2009 | 5x114.3 | 67.1 | 38-46 |
| 2010 | 5x114.3 | 67.1 | 38-46 |
| ▸ 2011 | 5x114.3 | 67.1 | 38-46 |
| 2012 | 5x114.3 | 67.1 | 38-46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Mitsubishi Galant
For your 2011 Mitsubishi Galant, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 38-46mm; deviating can cause rubbing or premature bearing wear. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat—never ball seat or acorn types. Torque to 80-90 ft-lbs and re-torque after 50 miles. Avoid spacers unless hub-centric and properly sized.
Historical Fitment Data Reference
In our dataset, Mitsubishi Galant appears from 1992 to 2012 (21 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 92.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for wheel settling.
- ✅ If using aftermarket wheels, verify hub-centric rings are installed to match the 67.1mm bore.
- ✅ Check for caliper clearance with aftermarket wheels; some designs may require spacers or grinding.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Mitsubishi Galant — Frequently Asked Questions
What is the bolt pattern for a 2011 Mitsubishi Galant?
The 2011 Mitsubishi Galant uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Galant have the same bolt pattern as the 2011?
The Mitsubishi Galant uses the 5x114.3 pattern from 2006 through 2012. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 Mitsubishi Galant?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Galant, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2011 Mitsubishi Galant?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
Why is matching the 67.1mm center bore important for the 2011 Galant?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Mitsubishi fit my 2011 Galant?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset