2000 Volvo S40 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2000 Volvo S40 is 4x114.3. It has a center bore of 67.1 mm, an offset range of 44, and utilizes N 12x1.50 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2000 Volvo S40 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 44 |
| Thread Size (Lug Nut / Bolt) | N 12x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
2000 S40 — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Volvo S40's 4x114.3 bolt pattern era, which continued through 2005 (6 consecutive years). Wheels from any 2000–2005 Volvo S40 are cross-compatible with the 2000 model. Across its full production run (2000–2011), the S40 has also used: 5x108.
Volvo S40 Bolt Pattern by Year
The table below shows how the S40's wheel specifications have changed over the years. The 2000 model year is highlighted.
2000 Volvo S40 Wheel Interchange & Donor Fitment Guide (4x114.3)
The 4x114.3 bolt pattern is shared by 175 vehicles in our database (uncommon). For safe wheel swaps on the 2000 Volvo S40, donor rims must match the 4x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 4x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2003 Kia Optima | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2006 Kia Optima (2006.5) | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 1992 Mitsubishi Galant | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2005 Mitsubishi Lancer | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 1992 Plymouth Colt | 67.1 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
| 1992 Plymouth Colt Vista | 67.1 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
Expert Buying Guide for 2000 Volvo S40
For your 2000 Volvo S40, the 4x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 44mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat, depending on the wheel). Mismatched lug nuts can lead to wheel loss. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safe handling.
Historical Fitment Data Reference
In our dataset, Volvo S40 appears from 2000 to 2011 (12 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and damage.
- ✅ If upgrading to larger wheels, test fitment with the suspension fully compressed to check for rubbing.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2000 Volvo S40 — Frequently Asked Questions
What is the bolt pattern for a 2000 Volvo S40?
The 2000 Volvo S40 uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Volvo S40 have the same bolt pattern as the 2000?
The Volvo S40 uses the 4x114.3 pattern from 2000 through 2005. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Volvo S40?
Absolutely. Just ensure the aftermarket wheels have a 4x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 67.1mm (using hub rings if larger).
What lug nut size does the 2000 Volvo S40 use?
The 2000 Volvo S40 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 44mm offset mean for the 2000 S40?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
How do I measure the bolt pattern on my 2000 Volvo?
The 2000 S40 uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →