2001 Volvo S40 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Volvo S40, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 S40 — Year-Specific Fitment Context
The 2001 Volvo S40 is in year 2 of 6 using the 4x114.3 pattern (2000–2005). Wheels from any 2000–2005 Volvo S40 are cross-compatible with the 2001 model. Across its full production run (2000–2011), the S40 has also used: 5x108.
Volvo S40 Bolt Pattern by Year
The table below shows how the S40's wheel specifications have changed over the years. The 2001 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2001 Volvo S40
When selecting wheels for your 2001 Volvo S40, the 4x114.3 bolt pattern is shared with 2000–2005 models, ensuring cross-compatibility. The center bore is 67.1mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is critical: the factory spec is 44mm, but a range of 38–50mm is acceptable. Going outside this range may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—conical (60-degree) or ball seat—matching the wheel. Improper lug nuts can lead to wheel loosening. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Volvo S40 appears from 2000 to 2011 (12 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 2.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 67.1mm to avoid vibrations.
- ✅ Stick to offset between 38mm and 50mm; lower offsets may cause fender rubbing, higher offsets may contact suspension components.
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles to ensure proper seating and prevent loosening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Volvo S40 — Frequently Asked Questions
What is the bolt pattern for a 2001 Volvo S40?
The 2001 Volvo S40 uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Volvo S40 have the same bolt pattern as the 2001?
The Volvo S40 uses the 4x114.3 pattern from 2000 through 2005. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the center bore of a 2001 Volvo S40?
The factory center bore (hub bore) for the 2001 Volvo S40 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2001 Volvo?
The 2001 S40 uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2001 Volvo S40?
The OEM offset for the 2001 S40 is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2001 Volvo S40s use lug bolts or lug nuts?
The 2001 S40 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset