2004 Volvo S40 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Volvo S40, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 S40 — Year-Specific Fitment Context
The 2004 Volvo S40 is in year 5 of 6 using the 4x114.3 pattern (2000–2005). Wheels from any 2000–2005 Volvo S40 are cross-compatible with the 2004 model. Across its full production run (2000–2011), the S40 has also used: 5x108.
Volvo S40 Bolt Pattern by Year
The table below shows how the S40's wheel specifications have changed over the years. The 2004 model year is highlighted.
Fitment Notes
The 2004 Volvo S40 has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo S40 appears from 2000 to 2011 (12 model years).
Across model years, this model appears with 2 bolt patterns (4x114.3, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 2.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
2004 Volvo S40 — Frequently Asked Questions
What is the bolt pattern for a 2004 Volvo S40?
The 2004 Volvo S40 uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 44mm.
What other years of Volvo S40 have the same bolt pattern as the 2004?
The Volvo S40 uses the 4x114.3 pattern from 2000 through 2005. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
Can I use spacers on my 2004 Volvo S40?
Yes, but ensure the wheel spacers match the 4x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Volvo fit my 2004 S40?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the center bore of a 2004 Volvo S40?
The factory center bore (hub bore) for the 2004 Volvo S40 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2004 Volvo S40?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 S40, the PCD is 4x114.3.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Volvo S40 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2000-2011 (12 model years).
- Observed bolt-pattern variants: 2 (4x114.3, 5x108).
- Observed total offset span across years: 2.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Volvo S40, please report it via our About page contact so we can verify and update this record.