2007 Volvo S40 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Volvo S40, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 S40 — Year-Specific Fitment Context
The 2007 Volvo S40 is in year 2 of 6 using the 5x108 pattern (2006–2011). Wheels from any 2006–2011 Volvo S40 are cross-compatible with the 2007 model. Across its full production run (2000–2011), the S40 has also used: 4x114.3.
Volvo S40 Bolt Pattern by Year
The table below shows how the S40's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Volvo S40 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo S40 appears from 2000 to 2011 (12 model years).
Across model years, this model appears with 2 bolt patterns (4x114.3, 5x108).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 2.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2007 Volvo S40 — Frequently Asked Questions
What is the bolt pattern for a 2007 Volvo S40?
The 2007 Volvo S40 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 46mm.
What other years of Volvo S40 have the same bolt pattern as the 2007?
The Volvo S40 uses the 5x108 pattern from 2006 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Why is matching the 63.4mm center bore important for the 2007 S40?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2007 Volvo S40?
The OEM offset for the 2007 S40 is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2007 Volvo S40s use lug bolts or lug nuts?
The 2007 S40 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2007 Volvo?
The 2007 S40 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Volvo S40 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2000-2011 (12 model years).
- Observed bolt-pattern variants: 2 (4x114.3, 5x108).
- Observed total offset span across years: 2.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Volvo S40, please report it via our About page contact so we can verify and update this record.