1997 Volvo V90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Volvo V90, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 43 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 V90 — Year-Specific Fitment Context
The 1997 model year marks the beginning of the Volvo V90's 5x108 bolt pattern era, which continued through 2024 (28 consecutive years). Wheels from any 1997–2024 Volvo V90 are cross-compatible with the 1997 model.
Volvo V90 Bolt Pattern by Year
The table below shows how the V90's wheel specifications have changed over the years. The 1997 model year is highlighted.
Fitment Notes
The 1997 Volvo V90 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo V90 appears from 1997 to 2024 (10 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 97.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
1997 Volvo V90 — Frequently Asked Questions
What is the bolt pattern for a 1997 Volvo V90?
The 1997 Volvo V90 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 43mm.
What other years of Volvo V90 have the same bolt pattern as the 1997?
The Volvo V90 uses the 5x108 pattern from 1997 through 2024. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1997 Volvo V90?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 43mm, and a center bore of at least 65.1mm (using hub rings if larger).
What does 43mm offset mean for the 1997 V90?
An offset of 43mm means the wheel's mounting surface is 43mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
What is the factory wheel offset for a 1997 Volvo V90?
The OEM offset for the 1997 V90 is typically around 43mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 1997 Volvo?
The 1997 V90 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo V90 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1997-2024 (10 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 97.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 3.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1997 Volvo V90, please report it via our About page contact so we can verify and update this record.