1992 Volvo 240 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Volvo 240, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 25 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1992 240 — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Volvo 240's 5x108 bolt pattern era, which continued through 1993 (2 consecutive years). Wheels from any 1992–1993 Volvo 240 are cross-compatible with the 1992 model.
Volvo 240 Bolt Pattern by Year
The table below shows how the 240's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x108 | 65.1 | 25 |
| 1993 | 5x108 | 65.1 | 25 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1992 Volvo 240
For your 1992 Volvo 240, the bolt pattern is 5x108 with a center bore of 65.1mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibrations. The offset range is critical: stick to 25mm ±5mm to avoid rubbing or clearance issues. Always verify lug nut thread pitch (1/2" x 20) and seat type—use conical (60-degree) or ball seat nuts as specified. Never mix seat types. Re-torque lug nuts after 50-100 miles to maintain safety.
Historical Fitment Data Reference
In our dataset, Volvo 240 appears from 1992 to 1993 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings (65.1mm ID to wheel hub OD) to prevent vibrations.
- ✅ Check offset carefully: 25mm is ideal; offsets beyond 20-30mm may cause rubbing on struts or fenders.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Volvo 240 — Frequently Asked Questions
What is the bolt pattern for a 1992 Volvo 240?
The 1992 Volvo 240 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 25mm.
What other years of Volvo 240 have the same bolt pattern as the 1992?
The Volvo 240 uses the 5x108 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the PCD for a 1992 Volvo 240?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 240, the PCD is 5x108.
What is the factory wheel offset for a 1992 Volvo 240?
The OEM offset for the 1992 240 is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1992 Volvo 240?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1992 Volvo 240?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 25mm, and a center bore of at least 65.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset