1993 Volvo 240 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Volvo 240, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 25 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1993 240 — Year-Specific Fitment Context
The 1993 model year is the final year of the Volvo 240's 5x108 bolt pattern run (since 1992). Wheels from any 1992–1993 Volvo 240 are cross-compatible with the 1993 model.
Volvo 240 Bolt Pattern by Year
The table below shows how the 240's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x108 | 65.1 | 25 |
| ▸ 1993 | 5x108 | 65.1 | 25 |
Fitment Notes
The 1993 Volvo 240 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo 240 appears from 1992 to 1993 (2 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
1993 Volvo 240 — Frequently Asked Questions
What is the bolt pattern for a 1993 Volvo 240?
The 1993 Volvo 240 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 25mm.
What other years of Volvo 240 have the same bolt pattern as the 1993?
The Volvo 240 uses the 5x108 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What lug nut size does the 1993 Volvo 240 use?
The 1993 Volvo 240 uses N 1/2" lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 1993 Volvo?
The 1993 240 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1993 Volvo 240?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 25mm, and a center bore of at least 65.1mm (using hub rings if larger).
Can I use spacers on my 1993 Volvo 240?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 65.1mm center bore. Also verify that you have enough thread engagement for your N 1/2" hardware.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo 240 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1993 (2 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 Volvo 240, please report it via our About page contact so we can verify and update this record.