2020 Volvo V90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Volvo V90, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 V90 — Year-Specific Fitment Context
The 2020 Volvo V90 is in year 24 of 28 using the 5x108 pattern (1997–2024). Wheels from any 1997–2024 Volvo V90 are cross-compatible with the 2020 model.
Volvo V90 Bolt Pattern by Year
The table below shows how the V90's wheel specifications have changed over the years. The 2020 model year is highlighted.
Fitment Notes
The 2020 Volvo V90 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo V90 appears from 1997 to 2024 (10 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 97.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2020 Volvo V90 — Frequently Asked Questions
What is the bolt pattern for a 2020 Volvo V90?
The 2020 Volvo V90 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-50mm.
What other years of Volvo V90 have the same bolt pattern as the 2020?
The Volvo V90 uses the 5x108 pattern from 1997 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the factory wheel offset for a 2020 Volvo V90?
The OEM offset for the 2020 V90 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2020 Volvo V90?
The factory center bore (hub bore) for the 2020 Volvo V90 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2020 Volvo V90s use lug bolts or lug nuts?
The 2020 V90 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2020 Volvo V90?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 V90, the PCD is 5x108.
Fitment Checklist Before You Buy Wheels
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo V90 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1997-2024 (10 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 97.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 3.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2020 Volvo V90, please report it via our About page contact so we can verify and update this record.