2013 Mitsubishi Lancer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Mitsubishi Lancer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 Lancer — Year-Specific Fitment Context
The 2013 Mitsubishi Lancer is in year 7 of 11 using the 5x114.3 pattern (2007–2017). Wheels from any 2007–2017 Mitsubishi Lancer are cross-compatible with the 2013 model. Across its full production run (2002–2017), the Lancer has also used: 4x100, 4x114.3.
Mitsubishi Lancer Bolt Pattern by Year
The table below shows how the Lancer's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 4x100 | 56.1 | 45 |
| 2003 | 4x100 | 56.1 | 45 |
| 2004 | 4x100 | 56.1 | 45 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| ▸ 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Mitsubishi Lancer
The 2013 Mitsubishi Lancer uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use the correct lug nuts: M12x1.5 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can lead to wheel loosening. Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Mitsubishi Lancer appears from 2002 to 2017 (16 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 67.1mm to avoid vibrations.
- ✅ Stick to offset between 40-50mm to prevent tire rubbing on fenders or suspension components.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving, as per factory specifications.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Mitsubishi Lancer — Frequently Asked Questions
What is the bolt pattern for a 2013 Mitsubishi Lancer?
The 2013 Mitsubishi Lancer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Lancer have the same bolt pattern as the 2013?
The Mitsubishi Lancer uses the 5x114.3 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the center bore of a 2013 Mitsubishi Lancer?
The factory center bore (hub bore) for the 2013 Mitsubishi Lancer is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2013 Mitsubishi Lancer?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What lug nut size does the 2013 Mitsubishi Lancer use?
The 2013 Mitsubishi Lancer uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2013 Mitsubishi Lancers use lug bolts or lug nuts?
The 2013 Lancer requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset