2011 Mitsubishi Lancer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mitsubishi Lancer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Lancer — Year-Specific Fitment Context
The 2011 Mitsubishi Lancer is in year 5 of 11 using the 5x114.3 pattern (2007–2017). Wheels from any 2007–2017 Mitsubishi Lancer are cross-compatible with the 2011 model. Across its full production run (2002–2017), the Lancer has also used: 4x100, 4x114.3.
Mitsubishi Lancer Bolt Pattern by Year
The table below shows how the Lancer's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 4x100 | 56.1 | 45 |
| 2003 | 4x100 | 56.1 | 45 |
| 2004 | 4x100 | 56.1 | 45 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| ▸ 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
Fitment Notes
The 2011 Mitsubishi Lancer has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mitsubishi Lancer appears from 2002 to 2017 (16 model years).
Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2011 Mitsubishi Lancer — Frequently Asked Questions
What is the bolt pattern for a 2011 Mitsubishi Lancer?
The 2011 Mitsubishi Lancer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Lancer have the same bolt pattern as the 2011?
The Mitsubishi Lancer uses the 5x114.3 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2011 Mitsubishi Lancer?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2011 Mitsubishi Lancer?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the factory wheel offset for a 2011 Mitsubishi Lancer?
The OEM offset for the 2011 Lancer is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 67.1mm center bore important for the 2011 Lancer?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Mitsubishi Lancer has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2002-2017 (16 model years).
- Observed bolt-pattern variants: 3 (4x100, 4x114.3, 5x114.3).
- Observed total offset span across years: 1.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 Mitsubishi Lancer, please report it via our About page contact so we can verify and update this record.