2012 Mitsubishi Lancer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Mitsubishi Lancer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Lancer — Year-Specific Fitment Context
The 2012 Mitsubishi Lancer is in year 6 of 11 using the 5x114.3 pattern (2007–2017). Wheels from any 2007–2017 Mitsubishi Lancer are cross-compatible with the 2012 model. Across its full production run (2002–2017), the Lancer has also used: 4x100, 4x114.3.
Mitsubishi Lancer Bolt Pattern by Year
The table below shows how the Lancer's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2002 | 4x100 | 56.1 | 45 |
| 2003 | 4x100 | 56.1 | 45 |
| 2004 | 4x100 | 56.1 | 45 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| ▸ 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Mitsubishi Lancer
For your 2012 Mitsubishi Lancer, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball-seat lug nuts as required. Improper lug nuts can lead to wheel detachment. Cross-compatible wheels from 2007–2017 Lancers fit, but avoid earlier 4-lug models.
Historical Fitment Data Reference
In our dataset, Mitsubishi Lancer appears from 2002 to 2017 (16 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving.
- ✅ Check for brake caliper clearance when using wheels with lower offset (e.g., 35mm) or wider tires.
- ✅ Use hub-centric rings if aftermarket wheels have a larger center bore than 67.1mm to avoid vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Mitsubishi Lancer — Frequently Asked Questions
What is the bolt pattern for a 2012 Mitsubishi Lancer?
The 2012 Mitsubishi Lancer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Mitsubishi Lancer have the same bolt pattern as the 2012?
The Mitsubishi Lancer uses the 5x114.3 pattern from 2007 through 2017. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Will wheels from another Mitsubishi fit my 2012 Lancer?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2012 Mitsubishi Lancer?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2012 Mitsubishi Lancer?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Lancer, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 2012 Mitsubishi Lancer?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset