2024 Hyundai Santa Fe Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Hyundai Santa Fe Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Santa Fe Hybrid — Year-Specific Fitment Context
The 2024 model year is the final year of the Hyundai Santa Fe Hybrid's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2024 Hyundai Santa Fe Hybrid are cross-compatible with the 2024 model.
Hyundai Santa Fe Hybrid Bolt Pattern by Year
The table below shows how the Santa Fe Hybrid's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Hyundai Santa Fe Hybrid
For the 2024 Hyundai Santa Fe Hybrid, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 35-50mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper for most aftermarket wheels, or ball seat for OEM). Never mix seat types. Re-torque after 50-100 miles. Note: 2024 is the final year for this bolt pattern; wheels from 2021-2023 models are direct fit.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe Hybrid appears from 2021 to 2024 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric rings are installed to match the 67.1mm center bore.
- ✅ Avoid wheels with offset below 35mm or above 50mm to prevent fender rubbing or brake caliper contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Hyundai Santa Fe Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2024 Hyundai Santa Fe Hybrid?
The 2024 Hyundai Santa Fe Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Santa Fe Hybrid have the same bolt pattern as the 2024?
The Hyundai Santa Fe Hybrid uses the 5x114.3 pattern from 2021 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Hyundai Santa Fe Hybrid use?
The 2024 Hyundai Santa Fe Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2024 Hyundai Santa Fe Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 Hyundai?
The 2024 Santa Fe Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2024 Hyundai Santa Fe Hybrid?
The OEM offset for the 2024 Santa Fe Hybrid is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset