2021 Hyundai Santa Fe Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Hyundai Santa Fe Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2021 Santa Fe Hybrid — Year-Specific Fitment Context
The 2021 model year marks the beginning of the Hyundai Santa Fe Hybrid's 5x114.3 bolt pattern era, which continued through 2024 (4 consecutive years). Wheels from any 2021–2024 Hyundai Santa Fe Hybrid are cross-compatible with the 2021 model.
Hyundai Santa Fe Hybrid Bolt Pattern by Year
The table below shows how the Santa Fe Hybrid's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2021 Hyundai Santa Fe Hybrid
For your 2021 Hyundai Santa Fe Hybrid, the 5x114.3 bolt pattern is shared with 2021-2024 models, ensuring cross-compatibility. The center bore is 67.1mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 35-50mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper) to avoid wheel loosening. Verify that aftermarket wheels clear brake calipers and suspension components. Professional installation and torque wrench use are strongly recommended.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe Hybrid appears from 2021 to 2024 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using aftermarket wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stress on studs may result.
- ✅ Check that the wheel's offset is within 35-50mm; offsets outside this range can cause rubbing or bearing damage.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Hyundai Santa Fe Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2021 Hyundai Santa Fe Hybrid?
The 2021 Hyundai Santa Fe Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Santa Fe Hybrid have the same bolt pattern as the 2021?
The Hyundai Santa Fe Hybrid uses the 5x114.3 pattern from 2021 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the center bore of a 2021 Hyundai Santa Fe Hybrid?
The factory center bore (hub bore) for the 2021 Hyundai Santa Fe Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2021 Hyundai Santa Fe Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2021 Hyundai Santa Fe Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Why is matching the 67.1mm center bore important for the 2021 Santa Fe Hybrid?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset