2025 Lotus Emira Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Lotus Emira is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 77 ft-lbs (105 Nm).
2025 Lotus Emira Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 77 ft-lbs (105 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Emira — Year-Specific Fitment Context
The 2025 Lotus Emira is in year 2 of 3 using the 5x114.3 pattern (2024–2026). Wheels from any 2024–2026 Lotus Emira are cross-compatible with the 2025 model.
Lotus Emira Bolt Pattern by Year
Looking for all generations? View the complete Lotus Emira (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Emira's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Lotus Emira Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Lotus Emira, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Hyundai Venue | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
| 2017 Jeep Patriot | 67.1 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2020 Kia Cadenza | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia Carnival | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia EV6 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Kia EV9 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 77 ft-lbs (105 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Lotus Emira — Frequently Asked Questions
What is the bolt pattern for a 2025 Lotus Emira?
The 2025 Lotus Emira uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of Lotus Emira have the same bolt pattern as the 2025?
The Lotus Emira uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 Lotus Emira?
The OEM offset for the 2025 Emira is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2025 Lotus Emira?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Emira, the PCD is 5x114.3.
Do 2025 Lotus Emiras use lug bolts or lug nuts?
The 2025 Emira requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 67.1mm center bore important for the 2025 Emira?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →