2026 Kia Sportage Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Kia Sportage Hybrid is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Kia Sportage Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Sportage Hybrid — Year-Specific Fitment Context
The 2026 model year is the final year of the Kia Sportage Hybrid's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2026 Kia Sportage Hybrid are cross-compatible with the 2026 model.
Kia Sportage Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Kia Sportage Hybrid (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the Sportage Hybrid's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Kia Sportage Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Kia Sportage Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Kia Niro | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
| 2025 Kia Niro EV | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia Niro Plug-in Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2007 Kia Optima | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2020 Kia Optima Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2020 Kia Optima Plug-in Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Kia Sportage Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2026 Kia Sportage Hybrid?
The 2026 Kia Sportage Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Sportage Hybrid have the same bolt pattern as the 2026?
The Kia Sportage Hybrid uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 Kia Sportage Hybrid?
The OEM offset for the 2026 Sportage Hybrid is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Kia fit my 2026 Sportage Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Do 2026 Kia Sportage Hybrids use lug bolts or lug nuts?
The 2026 Sportage Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2026 Kia Sportage Hybrid?
The factory center bore (hub bore) for the 2026 Kia Sportage Hybrid is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →