2007 Kia Optima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Kia Optima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 Optima — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Kia Optima's 5x114.3 bolt pattern era, which continued through 2020 (14 consecutive years). Wheels from any 2007–2020 Kia Optima are cross-compatible with the 2007 model. Note: the 2006 model used a different pattern (4x114.3), so its wheels are NOT interchangeable with the 2007. Across its full production run (2001–2020), the Optima has also used: 4x114.3.
Kia Optima Bolt Pattern by Year
The table below shows how the Optima's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 4x114.3 | 67.1 | 46 |
| 2002 | 4x114.3 | 67.1 | 46 |
| 2003 | 4x114.3 | 67.1 | 46 |
| 2004 | 4x114.3 | 67.1 | 46 |
| 2005 | 4x114.3 | 67.1 | 46 |
| 2006 | 4x114.3 | 67.1 | 46 |
| ▸ 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 41 |
| 2011 | 5x114.3 | 67.1 | 41 |
| 2012 | 5x114.3 | 67.1 | 41 |
| 2013 | 5x114.3 | 67.1 | 41 |
| 2014 | 5x114.3 | 67.1 | 41 |
| 2015 | 5x114.3 | 67.1 | 41 |
| 2016 | 5x114.3 | 67.1 | 41 |
| 2017 | 5x114.3 | 67.1 | 41 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Kia Optima
For the 2007 Kia Optima, the center bore is 67.1mm. When installing aftermarket wheels, hub-centric rings are essential to prevent vibrations and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) seat lug nuts for aftermarket wheels, as factory nuts are ball-seat and incompatible. Failure to match seat type can lead to loose wheels and accidents. Cross-compatible wheels from 2007–2020 Optimas share the same 5x114.3 bolt pattern, but always confirm center bore and offset.
Historical Fitment Data Reference
In our dataset, Kia Optima appears from 2001 to 2020 (20 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2006 or earlier Optimas (4x114.3 pattern) as they will not fit.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to prevent vibration.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Kia Optima — Frequently Asked Questions
What is the bolt pattern for a 2007 Kia Optima?
The 2007 Kia Optima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Kia Optima have the same bolt pattern as the 2007?
The Kia Optima uses the 5x114.3 pattern from 2007 through 2020. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use 2006 Kia Optima wheels on a 2007?
No. The 2006 Optima used a 4x114.3 bolt pattern, which differs from the 2007's 5x114.3. They are not interchangeable.
Do 2007 Kia Optimas use lug bolts or lug nuts?
The 2007 Optima requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2007 Kia Optima?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Kia fit my 2007 Optima?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset