2000 Dodge Stratus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Dodge Stratus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 Stratus — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Dodge Stratus's 5x114.3 bolt pattern era, which continued through 2006 (7 consecutive years). Wheels from any 2000–2006 Dodge Stratus are cross-compatible with the 2000 model. Note: the 1999 model used a different pattern (5x100), so its wheels are NOT interchangeable with the 2000. Across its full production run (1995–2006), the Stratus has also used: 5x100.
Dodge Stratus Bolt Pattern by Year
The table below shows how the Stratus's wheel specifications have changed over the years. The 2000 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Dodge Stratus
For the 2000 Dodge Stratus, the bolt pattern is 5x114.3mm, shared with 2000–2006 models. The center bore is 67.1mm—critical for hub-centric fitment. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: the factory spec is 41mm. Using a significantly different offset can cause rubbing or poor handling. Always verify lug nut thread pitch: M12x1.50. Use conical (60-degree) seat lug nuts unless the wheel specifies ball seat. Re-torque after 50–100 miles. Avoid wheels from 1999 or earlier (5x100).
Historical Fitment Data Reference
In our dataset, Dodge Stratus appears from 1995 to 2006 (12 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (67.1mm ID to wheel bore) for aftermarket wheels to prevent vibrations.
- ✅ Stick close to 41mm offset; deviations beyond ±5mm may cause clearance issues with struts or fenders.
- ✅ Re-torque lug nuts to 85–95 ft-lbs after 50–100 miles; never use impact wrench for final tightening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Dodge Stratus — Frequently Asked Questions
What is the bolt pattern for a 2000 Dodge Stratus?
The 2000 Dodge Stratus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 41mm.
What other years of Dodge Stratus have the same bolt pattern as the 2000?
The Dodge Stratus uses the 5x114.3 pattern from 2000 through 2006. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I use 1999 Dodge Stratus wheels on a 2000?
No. The 1999 Stratus used a 5x100 bolt pattern, which differs from the 2000's 5x114.3. They are not interchangeable.
Do 2000 Dodge Stratuss use lug bolts or lug nuts?
The 2000 Stratus requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2000 Dodge Stratus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 Stratus, the PCD is 5x114.3.
What is the center bore of a 2000 Dodge Stratus?
The factory center bore (hub bore) for the 2000 Dodge Stratus is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset