1995 Dodge Stratus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Dodge Stratus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Stratus — Year-Specific Fitment Context
The 1995 model year marks the beginning of the Dodge Stratus's 5x100 bolt pattern era, which continued through 1999 (5 consecutive years). Wheels from any 1995–1999 Dodge Stratus are cross-compatible with the 1995 model. Across its full production run (1995–2006), the Stratus has also used: 5x114.3.
Dodge Stratus Bolt Pattern by Year
The table below shows how the Stratus's wheel specifications have changed over the years. The 1995 model year is highlighted.
Fitment Notes
The 1995 Dodge Stratus has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Dodge Stratus appears from 1995 to 2006 (12 model years).
Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
1995 Dodge Stratus — Frequently Asked Questions
What is the bolt pattern for a 1995 Dodge Stratus?
The 1995 Dodge Stratus uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 41mm.
What other years of Dodge Stratus have the same bolt pattern as the 1995?
The Dodge Stratus uses the 5x100 pattern from 1995 through 1999. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What is the center bore of a 1995 Dodge Stratus?
The factory center bore (hub bore) for the 1995 Dodge Stratus is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 1995 Dodge Stratus use?
The 1995 Dodge Stratus uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 1995 Dodge Stratus?
The OEM offset for the 1995 Stratus is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 1995 Dodge Stratuss use lug bolts or lug nuts?
The 1995 Stratus requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Dodge Stratus has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1995-2006 (12 model years).
- Observed bolt-pattern variants: 2 (5x100, 5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1995 Dodge Stratus, please report it via our About page contact so we can verify and update this record.