2001 Dodge Stratus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Dodge Stratus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Stratus — Year-Specific Fitment Context
The 2001 Dodge Stratus is in year 2 of 7 using the 5x114.3 pattern (2000–2006). Wheels from any 2000–2006 Dodge Stratus are cross-compatible with the 2001 model. Across its full production run (1995–2006), the Stratus has also used: 5x100.
Dodge Stratus Bolt Pattern by Year
The table below shows how the Stratus's wheel specifications have changed over the years. The 2001 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Dodge Stratus
The 2001 Dodge Stratus uses a 5x114.3 bolt pattern with a 67.1mm center bore and 41mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. Offset sensitivity is critical; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type (cone or ball) to avoid wheel loosening. For 2000–2006 Stratus models, wheels are cross-compatible, but earlier 5x100 patterns require adapters. Safety first: improper fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, Dodge Stratus appears from 1995 to 2006 (12 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stress on studs may occur.
- ✅ Check inner clearance for offset changes; a 41mm offset is standard, but lower offsets may contact struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Dodge Stratus — Frequently Asked Questions
What is the bolt pattern for a 2001 Dodge Stratus?
The 2001 Dodge Stratus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 41mm.
What other years of Dodge Stratus have the same bolt pattern as the 2001?
The Dodge Stratus uses the 5x114.3 pattern from 2000 through 2006. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the factory wheel offset for a 2001 Dodge Stratus?
The OEM offset for the 2001 Stratus is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2001 Dodge Stratus?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Do 2001 Dodge Stratuss use lug bolts or lug nuts?
The 2001 Stratus requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2001 Dodge Stratus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Stratus, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset