2019 Hyundai Santa Fe XL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Hyundai Santa Fe XL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Santa Fe XL — Year-Specific Fitment Context
The 2019 is the only model year of the Hyundai Santa Fe XL in our database using the 5x114.3 bolt pattern.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Hyundai Santa Fe XL
For the 2019 Hyundai Santa Fe XL, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibrations. Offset must stay within 35-50mm to prevent rubbing or suspension interference. Always use the correct 12x1.5 lug nuts with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen and cause wheel detachment. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe XL appears from 2019 to 2019 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore of at least 67.1mm; use rings if larger.
- ✅ Avoid spacers unless necessary; they alter offset and may require longer studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Hyundai Santa Fe XL — Frequently Asked Questions
What is the bolt pattern for a 2019 Hyundai Santa Fe XL?
The 2019 Hyundai Santa Fe XL uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
How tight should I torque the lug nuts on a 2019 Hyundai Santa Fe XL?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2019 Hyundai Santa Fe XLs use lug bolts or lug nuts?
The 2019 Santa Fe XL requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2019 Hyundai Santa Fe XL?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Santa Fe XL, the PCD is 5x114.3.
What is the center bore of a 2019 Hyundai Santa Fe XL?
The factory center bore (hub bore) for the 2019 Hyundai Santa Fe XL is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2019 Hyundai Santa Fe XL?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset