2025 MAZDA MAZDA3 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 MAZDA MAZDA3 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 80-87 ft-lbs (108-118 Nm).
2025 MAZDA MAZDA3 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80-87 ft-lbs (108-118 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 MAZDA3 — Year-Specific Fitment Context
The 2025 MAZDA MAZDA3 is in year 22 of 23 using the 5x114.3 pattern (2004–2026). Wheels from any 2004–2026 MAZDA MAZDA3 are cross-compatible with the 2025 model.
MAZDA MAZDA3 Bolt Pattern by Year
Looking for all generations? View the complete MAZDA MAZDA3 (2004–2026) Bolt Pattern & Generation Guide →
The table below shows how the MAZDA3's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 5x114.3 | 67.1 | 52,5 |
| 2005 | 5x114.3 | 67.1 | 52,5 |
| 2006 | 5x114.3 | 67.1 | 52,5 |
| 2007 | 5x114.3 | 67.1 | 52,5 |
| 2008 | 5x114.3 | 67.1 | 52,5 |
| 2009 | 5x114.3 | 67.1 | 52,5 |
| 2010 | 5x114.3 | 67.1 | 52,5 |
| 2011 | 5x114.3 | 67.1 | 52,5 |
| 2012 | 5x114.3 | 67.1 | 52,5 |
| 2013 | 5x114.3 | 67.1 | 52,5 |
| 2014 | 5x114.3 | 67.1 | 52,5 |
| 2015 | 5x114.3 | 67.1 | 52,5 |
| 2016 | 5x114.3 | 67.1 | 52,5 |
| 2017 | 5x114.3 | 67.1 | 52,5 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
| 2024 | 5x114.3 | 67.1 | 45-50 |
| ▸ 2025 | 5x114.3 | 67.1 | 45-50 |
| 2026 | 5x114.3 | 67.1 | 45-50 |
2025 MAZDA MAZDA3 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 MAZDA MAZDA3, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Maserati Ghibli | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Maserati Grancabrio | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Maserati GranTurismo | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Maserati Levante | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Maserati MC20 | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2008 MAZDA B-Series Extended Cab | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
| 2003 Mercury Sable | 70.5 mm | 70.5mm → 67.1mm |
40 |
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80-87 ft-lbs (108-118 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 MAZDA MAZDA3 — Frequently Asked Questions
What is the bolt pattern for a 2025 MAZDA MAZDA3?
The 2025 MAZDA MAZDA3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA MAZDA3 have the same bolt pattern as the 2025?
The MAZDA MAZDA3 uses the 5x114.3 pattern from 2004 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the PCD for a 2025 MAZDA MAZDA3?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 MAZDA3, the PCD is 5x114.3.
Can I use spacers on my 2025 MAZDA MAZDA3?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the center bore of a 2025 MAZDA MAZDA3?
The factory center bore (hub bore) for the 2025 MAZDA MAZDA3 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2025 MAZDA MAZDA3 use?
The 2025 MAZDA MAZDA3 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →