2011 MAZDA MAZDA3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 MAZDA MAZDA3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 52,5 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 MAZDA3 — Year-Specific Fitment Context
The 2011 MAZDA MAZDA3 is in year 8 of 21 using the 5x114.3 pattern (2004–2024). Wheels from any 2004–2024 MAZDA MAZDA3 are cross-compatible with the 2011 model.
MAZDA MAZDA3 Bolt Pattern by Year
The table below shows how the MAZDA3's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 5x114.3 | 67.1 | 52,5 |
| 2005 | 5x114.3 | 67.1 | 52,5 |
| 2006 | 5x114.3 | 67.1 | 52,5 |
| 2007 | 5x114.3 | 67.1 | 52,5 |
| 2008 | 5x114.3 | 67.1 | 52,5 |
| 2009 | 5x114.3 | 67.1 | 52,5 |
| 2010 | 5x114.3 | 67.1 | 52,5 |
| ▸ 2011 | 5x114.3 | 67.1 | 52,5 |
| 2012 | 5x114.3 | 67.1 | 52,5 |
| 2013 | 5x114.3 | 67.1 | 52,5 |
| 2014 | 5x114.3 | 67.1 | 52,5 |
| 2015 | 5x114.3 | 67.1 | 52,5 |
| 2016 | 5x114.3 | 67.1 | 52,5 |
| 2017 | 5x114.3 | 67.1 | 52,5 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
| 2024 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 MAZDA MAZDA3
The 2011 MAZDA MAZDA3 uses a 5x114.3 bolt pattern with a 67.1mm center bore. When installing aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The offset range is 52-55mm; deviating significantly may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat) to avoid wheel loosening. Failure to match these specs compromises safety and handling.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA3 appears from 2004 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 102.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Verify wheel hub bore is at least 67.1mm; use hub-centric rings if larger.
- ✅ Check inner clearance for brake calipers and suspension components when changing offset.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 MAZDA MAZDA3 — Frequently Asked Questions
What is the bolt pattern for a 2011 MAZDA MAZDA3?
The 2011 MAZDA MAZDA3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 52,5mm.
What other years of MAZDA MAZDA3 have the same bolt pattern as the 2011?
The MAZDA MAZDA3 uses the 5x114.3 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 MAZDA MAZDA3?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 MAZDA3, the PCD is 5x114.3.
What is the center bore of a 2011 MAZDA MAZDA3?
The factory center bore (hub bore) for the 2011 MAZDA MAZDA3 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2011 MAZDA MAZDA3?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Can I put aftermarket wheels on my 2011 MAZDA MAZDA3?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 52,5mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset