2008 Aston Martin Vantage Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Aston Martin Vantage, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x2.00 |
| Center Bore (CB) | 68.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 150 ft-lbs (204 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Vantage — Year-Specific Fitment Context
The 2008 Aston Martin Vantage is in year 3 of 17 using the 5x114.3 pattern (2006–2022). Wheels from any 2006–2022 Aston Martin Vantage are cross-compatible with the 2008 model.
Aston Martin Vantage Bolt Pattern by Year
The table below shows how the Vantage's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 68.1 | 50 |
| 2007 | 5x114.3 | 68.1 | 50 |
| ▸ 2008 | 5x114.3 | 68.1 | 50 |
| 2009 | 5x114.3 | 68.1 | 50 |
| 2010 | 5x114.3 | 68.1 | 50 |
| 2011 | 5x114.3 | 68.1 | 50 |
| 2012 | 5x114.3 | 68.1 | 50 |
| 2013 | 5x114.3 | 68.1 | 50 |
| 2014 | 5x114.3 | 68.1 | 50 |
| 2015 | 5x114.3 | 68.1 | 50 |
| 2016 | 5x114.3 | 68.1 | 50 |
| 2017 | 5x114.3 | 68.1 | 50 |
| 2019 | 5x114.3 | 68.1 | 35-45mm |
| 2021 | 5x114.3 | 68.1 | 35-45mm |
| 2022 | 5x114.3 | 68.1 | 35-45mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Aston Martin Vantage
For your 2008 Aston Martin Vantage, the 5x114.3 bolt pattern is shared across 2006–2022 models, ensuring cross-compatibility. However, the 68.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations of ±5mm are acceptable, but wider offsets may cause rubbing or clearance issues. Always verify lug nut specifications: the 14x2.00 thread pitch and correct seat type (cone or ball) are essential. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50–100 miles and avoid mixing wheel types.
Historical Fitment Data Reference
In our dataset, Aston Martin Vantage appears from 2006 to 2022 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 lb-ft after 50–100 miles of driving.
- ✅ Aftermarket wheels with a larger center bore require hub-centric rings; never rely solely on lug nuts for centering.
- ✅ Check inner clearance with aftermarket wheels; the 50mm offset is tight, and wider wheels may contact suspension components.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Aston Martin Vantage — Frequently Asked Questions
What is the bolt pattern for a 2008 Aston Martin Vantage?
The 2008 Aston Martin Vantage uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 68.1mm and the offset is 50mm.
What other years of Aston Martin Vantage have the same bolt pattern as the 2008?
The Aston Martin Vantage uses the 5x114.3 pattern from 2006 through 2022. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What lug nut size does the 2008 Aston Martin Vantage use?
The 2008 Aston Martin Vantage uses B 14x2.00 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2008 Aston Martin Vantage?
The OEM offset for the 2008 Vantage is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 68.1mm center bore important for the 2008 Vantage?
The 68.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2008 Aston Martin Vantage?
Refer to your owner's manual for exact specs, but always tighten the B 14x2.00 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset