2011 Aston Martin Vantage Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Aston Martin Vantage, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x2.00 |
| Center Bore (CB) | 68.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 150 ft-lbs (204 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Vantage — Year-Specific Fitment Context
The 2011 Aston Martin Vantage is in year 6 of 17 using the 5x114.3 pattern (2006–2022). Wheels from any 2006–2022 Aston Martin Vantage are cross-compatible with the 2011 model.
Aston Martin Vantage Bolt Pattern by Year
The table below shows how the Vantage's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 68.1 | 50 |
| 2007 | 5x114.3 | 68.1 | 50 |
| 2008 | 5x114.3 | 68.1 | 50 |
| 2009 | 5x114.3 | 68.1 | 50 |
| 2010 | 5x114.3 | 68.1 | 50 |
| ▸ 2011 | 5x114.3 | 68.1 | 50 |
| 2012 | 5x114.3 | 68.1 | 50 |
| 2013 | 5x114.3 | 68.1 | 50 |
| 2014 | 5x114.3 | 68.1 | 50 |
| 2015 | 5x114.3 | 68.1 | 50 |
| 2016 | 5x114.3 | 68.1 | 50 |
| 2017 | 5x114.3 | 68.1 | 50 |
| 2019 | 5x114.3 | 68.1 | 35-45mm |
| 2021 | 5x114.3 | 68.1 | 35-45mm |
| 2022 | 5x114.3 | 68.1 | 35-45mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Aston Martin Vantage
For the 2011 Aston Martin Vantage, the correct bolt pattern is 5x114.3 with a center bore of 68.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is critical; the factory offset is 50mm, and deviations beyond ±5mm may cause rubbing or clearance issues with brakes and suspension. Always verify lug nut specifications: the thread pitch is 14x2.00, and the seat type must match—typically a ball seat for Aston Martin. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Aston Martin Vantage appears from 2006 to 2022 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 68.1mm center bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug studs and proper offset to maintain scrub radius.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Aston Martin Vantage — Frequently Asked Questions
What is the bolt pattern for a 2011 Aston Martin Vantage?
The 2011 Aston Martin Vantage uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 68.1mm and the offset is 50mm.
What other years of Aston Martin Vantage have the same bolt pattern as the 2011?
The Aston Martin Vantage uses the 5x114.3 pattern from 2006 through 2022. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What lug nut size does the 2011 Aston Martin Vantage use?
The 2011 Aston Martin Vantage uses B 14x2.00 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2011 Aston Martin Vantages use lug bolts or lug nuts?
The 2011 Vantage requires B 14x2.00 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2011 Aston Martin Vantage?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 68.1mm center bore. Also verify that you have enough thread engagement for your B 14x2.00 hardware.
How do I measure the bolt pattern on my 2011 Aston Martin?
The 2011 Vantage uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset