2010 Aston Martin Vantage Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Aston Martin Vantage, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x2.00 |
| Center Bore (CB) | 68.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 150 ft-lbs (204 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Vantage — Year-Specific Fitment Context
The 2010 Aston Martin Vantage is in year 5 of 17 using the 5x114.3 pattern (2006–2022). Wheels from any 2006–2022 Aston Martin Vantage are cross-compatible with the 2010 model.
Aston Martin Vantage Bolt Pattern by Year
The table below shows how the Vantage's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2006 | 5x114.3 | 68.1 | 50 |
| 2007 | 5x114.3 | 68.1 | 50 |
| 2008 | 5x114.3 | 68.1 | 50 |
| 2009 | 5x114.3 | 68.1 | 50 |
| ▸ 2010 | 5x114.3 | 68.1 | 50 |
| 2011 | 5x114.3 | 68.1 | 50 |
| 2012 | 5x114.3 | 68.1 | 50 |
| 2013 | 5x114.3 | 68.1 | 50 |
| 2014 | 5x114.3 | 68.1 | 50 |
| 2015 | 5x114.3 | 68.1 | 50 |
| 2016 | 5x114.3 | 68.1 | 50 |
| 2017 | 5x114.3 | 68.1 | 50 |
| 2019 | 5x114.3 | 68.1 | 35-45mm |
| 2021 | 5x114.3 | 68.1 | 35-45mm |
| 2022 | 5x114.3 | 68.1 | 35-45mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Aston Martin Vantage
For your 2010 Aston Martin Vantage, the 5x114.3 bolt pattern and 68.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: stock is 50mm; deviations affect handling and clearance. Stay within ±5mm to avoid rubbing or stress on bearings. Lug nuts are 14x2.00 thread pitch with a ball seat. Never use conical (tapered) nuts—they can loosen or damage the wheel. Always torque to manufacturer specs (100 lb-ft) and re-torque after 50 miles. Wheels from 2006–2022 Vantages are direct fit.
Historical Fitment Data Reference
In our dataset, Aston Martin Vantage appears from 2006 to 2022 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid aftermarket wheels with offset below 45mm or above 55mm to prevent rubbing or clearance issues.
- ✅ Always verify that aftermarket wheels have a ball seat lug nut interface; conical seats are unsafe for this vehicle.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Aston Martin Vantage — Frequently Asked Questions
What is the bolt pattern for a 2010 Aston Martin Vantage?
The 2010 Aston Martin Vantage uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 68.1mm and the offset is 50mm.
What other years of Aston Martin Vantage have the same bolt pattern as the 2010?
The Aston Martin Vantage uses the 5x114.3 pattern from 2006 through 2022. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the center bore of a 2010 Aston Martin Vantage?
The factory center bore (hub bore) for the 2010 Aston Martin Vantage is 68.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2010 Aston Martin Vantages use lug bolts or lug nuts?
The 2010 Vantage requires B 14x2.00 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2010 Aston Martin Vantage?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Vantage, the PCD is 5x114.3.
What is the factory wheel offset for a 2010 Aston Martin Vantage?
The OEM offset for the 2010 Vantage is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset