2025 Ferrari 296 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Ferrari 296 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Ball seat) fasteners tightened to Not Applicable.
2025 Ferrari 296 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Wheel Torque Specs | Not Applicable |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 296 — Year-Specific Fitment Context
The 2025 Ferrari 296 is in year 2 of 3 using the 5x114.3 pattern (2024–2026). Wheels from any 2024–2026 Ferrari 296 are cross-compatible with the 2025 model.
Ferrari 296 Bolt Pattern by Year
Looking for all generations? View the complete Ferrari 296 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 296's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Ferrari 296 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Ferrari 296, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2022 Maserati Quattroporte | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2008 MAZDA B-Series Extended Cab | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2008 MAZDA B-Series Regular Cab | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2021 MAZDA CX-3 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2025 MAZDA CX-30 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
| 2025 MAZDA CX-5 | 67.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
| 2003 Mercury Sable | 70.5 mm | 70.5mm → 67.1mm |
40 |
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to Not Applicable, then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Ferrari 296 — Frequently Asked Questions
What is the bolt pattern for a 2025 Ferrari 296?
The 2025 Ferrari 296 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Not Applicablemm.
What other years of Ferrari 296 have the same bolt pattern as the 2025?
The Ferrari 296 uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Ferrari 296s use lug bolts or lug nuts?
The 2025 296 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does Not Applicablemm offset mean for the 2025 296?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
Why is matching the 67.1mm center bore important for the 2025 296?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2025 Ferrari 296?
The OEM offset for the 2025 296 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →