2025 Hyundai IONIQ 5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Hyundai IONIQ 5 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-55, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79 ft-lbs (107 Nm).
2025 Hyundai IONIQ 5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-55 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79 ft-lbs (107 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 IONIQ 5 — Year-Specific Fitment Context
The 2025 Hyundai IONIQ 5 is in year 4 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 Hyundai IONIQ 5 are cross-compatible with the 2025 model.
Hyundai IONIQ 5 Bolt Pattern by Year
Looking for all generations? View the complete Hyundai IONIQ 5 (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the IONIQ 5's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Hyundai IONIQ 5 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Hyundai IONIQ 5, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Genesis GV80 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Genesis GV80 Coupe | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2013 Hyundai Accent | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2017 Hyundai Azera | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2008 Hyundai Elantra | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2020 Hyundai Elantra GT | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79 ft-lbs (107 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Hyundai IONIQ 5 — Frequently Asked Questions
What is the bolt pattern for a 2025 Hyundai IONIQ 5?
The 2025 Hyundai IONIQ 5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-55mm.
What other years of Hyundai IONIQ 5 have the same bolt pattern as the 2025?
The Hyundai IONIQ 5 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Will wheels from another Hyundai fit my 2025 IONIQ 5?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the PCD for a 2025 Hyundai IONIQ 5?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 IONIQ 5, the PCD is 5x114.3.
Why is matching the 67.1mm center bore important for the 2025 IONIQ 5?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2025 Hyundai IONIQ 5?
The factory center bore (hub bore) for the 2025 Hyundai IONIQ 5 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →