2024 Hyundai IONIQ 5 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Hyundai IONIQ 5, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 IONIQ 5 — Year-Specific Fitment Context
The 2024 model year is the final year of the Hyundai IONIQ 5's 5x114.3 bolt pattern run (since 2022). Wheels from any 2022–2024 Hyundai IONIQ 5 are cross-compatible with the 2024 model.
Hyundai IONIQ 5 Bolt Pattern by Year
The table below shows how the IONIQ 5's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Hyundai IONIQ 5
For the 2024 Hyundai IONIQ 5, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is 35-50mm; staying within this range avoids rubbing on suspension or fenders. Always use lug nuts with the correct 12x1.5 thread pitch and appropriate seat type (conical/60-degree taper for most aftermarket wheels; ball seat for OEM). Improper lug nuts can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Hyundai IONIQ 5 appears from 2022 to 2024 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric rings are installed to match the 67.1mm center bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain scrub radius.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Hyundai IONIQ 5 — Frequently Asked Questions
What is the bolt pattern for a 2024 Hyundai IONIQ 5?
The 2024 Hyundai IONIQ 5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai IONIQ 5 have the same bolt pattern as the 2024?
The Hyundai IONIQ 5 uses the 5x114.3 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Will wheels from another Hyundai fit my 2024 IONIQ 5?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Do 2024 Hyundai IONIQ 5s use lug bolts or lug nuts?
The 2024 IONIQ 5 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 67.1mm center bore important for the 2024 IONIQ 5?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2024 Hyundai IONIQ 5?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset