2025 Genesis GV70 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Genesis GV70 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2025 Genesis GV70 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 GV70 — Year-Specific Fitment Context
The 2025 Genesis GV70 is in year 4 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 Genesis GV70 are cross-compatible with the 2025 model.
Genesis GV70 Bolt Pattern by Year
Looking for all generations? View the complete Genesis GV70 (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the GV70's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Genesis GV70 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Genesis GV70, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Hyundai Venue | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
| 2017 Jeep Patriot | 67.1 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2020 Kia Cadenza | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia Carnival | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia EV6 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Kia EV9 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Genesis GV70 — Frequently Asked Questions
What is the bolt pattern for a 2025 Genesis GV70?
The 2025 Genesis GV70 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of Genesis GV70 have the same bolt pattern as the 2025?
The Genesis GV70 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2025 Genesis GV70?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 67.1mm (using hub rings if larger).
Why is matching the 67.1mm center bore important for the 2025 GV70?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2025 Genesis GV70?
The OEM offset for the 2025 GV70 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2025 Genesis?
The 2025 GV70 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →