2025 Genesis GV60 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Genesis GV60 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79 ft-lbs (107 Nm).
2025 Genesis GV60 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79 ft-lbs (107 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 GV60 — Year-Specific Fitment Context
The 2025 Genesis GV60 is in year 4 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 Genesis GV60 are cross-compatible with the 2025 model.
Genesis GV60 Bolt Pattern by Year
Looking for all generations? View the complete Genesis GV60 (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the GV60's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Genesis GV60 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Genesis GV60, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2018 Kia Rio | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2016 Kia Sedona | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2025 Kia Seltos | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
| 2011 Kia Sorento | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2025 Kia Sorento Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia Sorento Plug-in Hybrid | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 79 ft-lbs (107 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Genesis GV60 — Frequently Asked Questions
What is the bolt pattern for a 2025 Genesis GV60?
The 2025 Genesis GV60 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Genesis GV60 have the same bolt pattern as the 2025?
The Genesis GV60 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the center bore of a 2025 Genesis GV60?
The factory center bore (hub bore) for the 2025 Genesis GV60 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2025 Genesis GV60s use lug bolts or lug nuts?
The 2025 GV60 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Genesis fit my 2025 GV60?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I put aftermarket wheels on my 2025 Genesis GV60?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 67.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →