2022 Genesis GV60 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Genesis GV60, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 GV60 — Year-Specific Fitment Context
The 2022 model year marks the beginning of the Genesis GV60's 5x114.3 bolt pattern era, which continued through 2024 (3 consecutive years). Wheels from any 2022–2024 Genesis GV60 are cross-compatible with the 2022 model.
Genesis GV60 Bolt Pattern by Year
The table below shows how the GV60's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Genesis GV60
For your 2022 Genesis GV60, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 35-50mm; deviations risk rubbing or brake clearance issues. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat. Avoid ball-seat or shank-style nuts. Re-torque after 50-100 miles. Wheels from 2022-2024 GV60 models are direct fit.
Historical Fitment Data Reference
In our dataset, Genesis GV60 appears from 2022 to 2024 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Aftermarket wheels require hub-centric rings (67.1mm ID to wheel's bore) to avoid vibrations.
- ✅ Verify offset within 35-50mm; lower offsets may rub fenders, higher offsets may contact brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Genesis GV60 — Frequently Asked Questions
What is the bolt pattern for a 2022 Genesis GV60?
The 2022 Genesis GV60 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Genesis GV60 have the same bolt pattern as the 2022?
The Genesis GV60 uses the 5x114.3 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2022 Genesis GV60?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2022 Genesis GV60?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Why is matching the 67.1mm center bore important for the 2022 GV60?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2022 Genesis GV60?
The factory center bore (hub bore) for the 2022 Genesis GV60 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset