2020 Kia Optima Plug-in Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Kia Optima Plug-in Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Optima Plug-in Hybrid — Year-Specific Fitment Context
The 2020 model year is the final year of the Kia Optima Plug-in Hybrid's 5x114.3 bolt pattern run (since 2017). Wheels from any 2017–2020 Kia Optima Plug-in Hybrid are cross-compatible with the 2020 model.
Kia Optima Plug-in Hybrid Bolt Pattern by Year
The table below shows how the Optima Plug-in Hybrid's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Kia Optima Plug-in Hybrid
For your 2020 Kia Optima Plug-in Hybrid, the center bore is 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibrations and ensure proper load distribution. Offset must stay within 35-50mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat—to avoid wheel loosening. Never mix seat types. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Kia Optima Plug-in Hybrid appears from 2017 to 2020 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel bore is 67.1mm or use hub-centric rings; avoid universal fitments without rings.
- ✅ Check offset carefully: lower offset (35mm) pushes wheels outward; higher offset (50mm) tucks them in. Test fit before purchase.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Kia Optima Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2020 Kia Optima Plug-in Hybrid?
The 2020 Kia Optima Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Optima Plug-in Hybrid have the same bolt pattern as the 2020?
The Kia Optima Plug-in Hybrid uses the 5x114.3 pattern from 2017 through 2020. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2020 Kia Optima Plug-in Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2020 Kia Optima Plug-in Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2020 Kia?
The 2020 Optima Plug-in Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2020 Kia Optima Plug-in Hybrid use?
The 2020 Kia Optima Plug-in Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset