2025 Kia Sorento Plug-in Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Kia Sorento Plug-in Hybrid is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 Kia Sorento Plug-in Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Sorento Plug-in Hybrid — Year-Specific Fitment Context
The 2025 Kia Sorento Plug-in Hybrid is in year 4 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 Kia Sorento Plug-in Hybrid are cross-compatible with the 2025 model.
Kia Sorento Plug-in Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Kia Sorento Plug-in Hybrid (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the Sorento Plug-in Hybrid's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Kia Sorento Plug-in Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Kia Sorento Plug-in Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Ferrari 296 GTB | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2015 Ferrari 458 Italia | 67.1 mm (Exact) | 45 front, 58 rear | N 14x1.50 (Ball) |
| 2015 Ferrari 458 Speciale | 67.1 mm (Exact) | 45 front, 48 rear | N 14x1.50 (Ball) |
| 2015 Ferrari 458 Spider | 67.1 mm (Exact) | 45 front, 58 rear | N 14x1.50 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1999 Dodge Viper | 70.5 mm | 70.5mm → 67.1mm |
50 front, 70 rear |
| 1994 Ford Explorer | 87.1 mm | 87.1mm → 67.1mm |
44 |
| 1993 Ford Mustang | 70.3 mm | 70.3mm → 67.1mm |
30 |
| 2025 Ford Mustang GTD | 70.5 mm | 70.5mm → 67.1mm |
Not Applicable |
| 1994 Ford Ranger Regular Cab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1996 Ford Ranger SuperCab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Kia Sorento Plug-in Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2025 Kia Sorento Plug-in Hybrid?
The 2025 Kia Sorento Plug-in Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Sorento Plug-in Hybrid have the same bolt pattern as the 2025?
The Kia Sorento Plug-in Hybrid uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Kia Sorento Plug-in Hybrids use lug bolts or lug nuts?
The 2025 Sorento Plug-in Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2025 Kia Sorento Plug-in Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the factory wheel offset for a 2025 Kia Sorento Plug-in Hybrid?
The OEM offset for the 2025 Sorento Plug-in Hybrid is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 67.1mm center bore important for the 2025 Sorento Plug-in Hybrid?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →