2026 Hyundai IONIQ 5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai IONIQ 5 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-55, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79 ft-lbs (107 Nm).
2026 Hyundai IONIQ 5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-55 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79 ft-lbs (107 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 IONIQ 5 — Year-Specific Fitment Context
The 2026 model year is the final year of the Hyundai IONIQ 5's 5x114.3 bolt pattern run (since 2022). Wheels from any 2022–2026 Hyundai IONIQ 5 are cross-compatible with the 2026 model.
Hyundai IONIQ 5 Bolt Pattern by Year
Looking for all generations? View the complete Hyundai IONIQ 5 (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the IONIQ 5's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Hyundai IONIQ 5 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai IONIQ 5, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Ferrari 812 | 67.1 mm (Exact) | Front: +32mm, Rear: +40mm | 14x1.5 (Ball) |
| 2022 Ferrari 812 Competizione | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2022 Ferrari 812 Competizione A | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2022 Ferrari 812 GTS | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2021 Ferrari 812 Superfast | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2017 Ferrari California | 67.1 mm (Exact) | 44 front, 53 rear | N 14x1.50 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Ford Explorer | 87.1 mm | 87.1mm → 67.1mm |
44 |
| 1993 Ford Mustang | 70.3 mm | 70.3mm → 67.1mm |
30 |
| 2025 Ford Mustang GTD | 70.5 mm | 70.5mm → 67.1mm |
Not Applicable |
| 1994 Ford Ranger Regular Cab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1996 Ford Ranger SuperCab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79 ft-lbs (107 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Hyundai IONIQ 5 — Frequently Asked Questions
What is the bolt pattern for a 2026 Hyundai IONIQ 5?
The 2026 Hyundai IONIQ 5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-55mm.
What other years of Hyundai IONIQ 5 have the same bolt pattern as the 2026?
The Hyundai IONIQ 5 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Hyundai IONIQ 5?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2026 Hyundai IONIQ 5s use lug bolts or lug nuts?
The 2026 IONIQ 5 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2026 Hyundai?
The 2026 IONIQ 5 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 67.1mm center bore important for the 2026 IONIQ 5?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →