2022 Ferrari 812 Competizione Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Ferrari 812 Competizione, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 812 Competizione — Year-Specific Fitment Context
The 2022 is the only model year of the Ferrari 812 Competizione in our database using the 5x114.3 bolt pattern.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Ferrari 812 Competizione
The 2022 Ferrari 812 Competizione uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset is sensitive; stick to ±5mm of the factory 45mm offset to maintain steering geometry and avoid rubbing. Always use lug nuts with the correct 14x1.5 thread pitch and a ball seat (M14 ball seat) to match Ferrari's factory design. Never use conical seat lug nuts, as they can damage the wheel hub. Re-torque lug nuts after 50-100 miles of driving. Verify wheel clearance with brake calipers, as the Competizione's carbon-ceramic brakes are large.
Historical Fitment Data Reference
In our dataset, Ferrari 812 Competizione appears from 2022 to 2022 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (67.1mm to aftermarket bore) to prevent vibrations and hub damage.
- ✅ Stick to offsets within 40-50mm; lower offsets may cause rubbing on the wide fenders.
- ✅ Re-torque lug nuts to 90 lb-ft after 50 miles; use a torque wrench to avoid over-tightening.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Ferrari 812 Competizione — Frequently Asked Questions
What is the bolt pattern for a 2022 Ferrari 812 Competizione?
The 2022 Ferrari 812 Competizione uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What is the PCD for a 2022 Ferrari 812 Competizione?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2022 812 Competizione, the PCD is 5x114.3.
Why is matching the 67.1mm center bore important for the 2022 812 Competizione?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Ferrari fit my 2022 812 Competizione?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2022 Ferrari 812 Competizione?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Do 2022 Ferrari 812 Competiziones use lug bolts or lug nuts?
The 2022 812 Competizione requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset