2026 Genesis GV80 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Genesis GV80 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-50, and utilizes 12x1.5 (Cone seat, 22mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Genesis GV80 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 GV80 — Year-Specific Fitment Context
The 2026 model year is the final year of the Genesis GV80's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2026 Genesis GV80 are cross-compatible with the 2026 model.
Genesis GV80 Bolt Pattern by Year
Looking for all generations? View the complete Genesis GV80 (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the GV80's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Genesis GV80 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Genesis GV80, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2016 Hyundai Equus | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2016 Hyundai Genesis | 67.1 mm (Exact) | 35 | N 12x1.50 (Cone) |
| 2016 Hyundai Genesis Coupe | 67.1 mm (Exact) | 35 | N 12x1.50 (Cone) |
| 2025 Hyundai IONIQ 5 | 67.1 mm (Exact) | 45-55 | 12x1.5 (Flat) |
| 2025 Hyundai Ioniq 5 N | 67.1 mm (Exact) | Not Applicable | 12x1.5 (Flat) |
| 2025 Hyundai IONIQ 6 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Genesis GV80 — Frequently Asked Questions
What is the bolt pattern for a 2026 Genesis GV80?
The 2026 Genesis GV80 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Genesis GV80 have the same bolt pattern as the 2026?
The Genesis GV80 uses the 5x114.3 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Genesis GV80?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the center bore of a 2026 Genesis GV80?
The factory center bore (hub bore) for the 2026 Genesis GV80 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2026 Genesis GV80 use?
The 2026 Genesis GV80 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2026 Genesis GV80?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →